Genesis Deck Box provides a safe impact-proof home for up to 100 double sleeved standard cards, or 120 single-sleeved cards. They are perfect for use with our Competitor's Series sleeve range. Features: Impact-proof Nitracore® internal structure Quick-link buckle system Magnetic lid closure 100+ storage capacity
Our Graded Card Case is PSA, BGS & PCG compatible, and features deep cutouts at the front to read your slab information. As always, we've worked to ensure only the best materials were used to bring you this storage box to market. Features: Compatible with PSA (and identical-sized slabs) PCG & BGS graded card slabs 1 storage row, holding up to 20 graded cards* Supremely sturdy design Strong magnet closure Polyester felt inside cover Textured PU leather exterior This case is modelled based on the height of a PSA graded card slab, and the width of a BGS graded card slab. As such BGS graded cards will fit slightly more snug than PSA. Available in black, red, blue, yellow, purple, pink and turquoise. *Based on PSA graded card slabs – case capacity is subject to the thickness of other graded card slabs and sleeves. Case Dimensions: W 9.5cm x H 14.5cm x D 14.5cm
Features: Textured PU leather finish Durable steel zip closure Side loading premium pockets (480 slots) Polyester Felt inside cover
Features: Textured PU leather finish Durable steel zip closure Side loading premium pockets (360 slots) Polyester Felt inside cover
Features: Textured PU leather finish Durable steel zip closure Side loading premium pockets (160 slots) Polyester Felt inside cover
Our Graded Card Case is PSA, BGS & PCG compatible, and features deep cutouts at the front to read your slab information. As always, we've worked to ensure only the best materials were used to bring you this storage box to market. Features: Compatible with PSA (and identical-sized slabs) PCG & BGS graded card slabs 1 storage row, holding up to 20 graded cards* Supremely sturdy design Strong magnet closure Polyester felt inside cover Textured PU leather exterior This case is modelled based on the height of a PSA graded card slab, and the width of a BGS graded card slab. As such BGS graded cards will fit slightly more snug than PSA. Available in black, red, blue, yellow, purple, pink and turquoise. *Based on PSA graded card slabs – case capacity is subject to the thickness of other graded card slabs and sleeves. Case Dimensions: W 9.5cm x H 14.5cm x D 14.5cm
Our Graded Card Case is PSA, BGS & PCG compatible, and features deep cutouts at the front to read your slab information. As always, we've worked to ensure only the best materials were used to bring you this storage box to market. Features: Compatible with PSA (and identical-sized slabs) PCG & BGS graded card slabs 1 storage row, holding up to 20 graded cards* Supremely sturdy design Strong magnet closure Polyester felt inside cover Textured PU leather exterior This case is modelled based on the height of a PSA graded card slab, and the width of a BGS graded card slab. As such BGS graded cards will fit slightly more snug than PSA. Available in black, red, blue, yellow, purple, pink and turquoise. *Based on PSA graded card slabs – case capacity is subject to the thickness of other graded card slabs and sleeves. Case Dimensions: W 9.5cm x H 14.5cm x D 14.5cm
Tired of putting sticky notes/tabs on your soft sleeves to send your cards off for grading? We sure are, after prepping our own cards the hard way for the last five years... Problem solved with our new tag sleeves! Features include: A broad, round edged tag to pull and remove your card from a Grading Holder or other semi-rigid sleeve. This broad sleeve maintains structural integrity to your sleeve as its pulled 60 micron thick PVC free plastic A neat tray to keep your sleeves in a nice stack It's time to make life easier for yourself!
Team bags are perfect for storing and bagging team sets, multiple Top Loaders, or cards in soft sleeves. Features Acid-free, PVC-free, archival safe material Holds Card Sets and Toploaders (up to 6pc 35pt 3x4" toploaders) Ultra-clear polypropylene Resealable Lip Sleeve dimensions 88mm x 116mm + lip
Our BGS MintFit Sleeves are optimally sized for your BGS graded cards, any like-sized slab will also fit (see slab dimensions below). Each pack contains 100pc 50 micron thick polypropylene sleeves. Archival-safe PVC-free and acid-free high-clarity premium material. Also featuring a V Shaped resealable lip - your BGS cards are going to be well protected. Features: V-Shaped resealable lip 50 micron PVC and acid-free material High clarity premium material Archival safe Designed for typical 35pt BGS slab. Sleeve dimensions 92mm x 135mm Typical slab dimensions for reference: 81mm x 128.5mm x 8mm (W x L x H)
Our extra thick Booster MintFit Sleeves are optimally sized for your standard booster packs of ~10 cards (ie. Pokemon, and like sized packs). Each pack contains 50pc 100 micron thick polypropylene sleeves. Archival-safe PVC-free and acid-free premium material. Also featuring a V Shaped resealable lip - your booster packs are going to be well protected. Features: V-Shaped resealable lip 100 micron PVC and acid-free material Great clarity premium material Archival safe Sleeve tray Perfect to combine with our Booster Pack Top Loaders and Booster Pack Top Loader oversleeves. Sleeve dimensions: 73mm x 120mm + lip
Made for our booster pack top loaders to add an extra layer of protection for your prized collectables – check out the booster pack top loaders here. Features: Acid-free / No PVC. Tailored to our Booster Pack Top Loaders. Ultra-clear polypropylene. Built-in tray for a neat sleeve storage. MintFit® is a sub-series of Palms Off Gaming's Collector's Series range of products, which are designed to exceed the needs of the avid Australian collecting community.
Made for our 35pt Mag-Lock card cases to completely protect cards from any potential contaminants and dust. These are compatible with 35pt, 55pt, and 75pt Mag-Lock card cases. Features: Acid-free / No PVC. Fits our 35pt, 55pt & 75pt Mag-Lock card cases. Ultra-clear polypropylene. Built-in tray for neat sleeve storage. MintFit® is a sub-series of Palms Off Gaming's Collector's Series range of products, which are designed to exceed the needs of the avid Australian collecting community.
Made for our 130pt Mag-Lock card cases to completely protect cards from any potential contaminants and dust. These sleeves are compatible with 100pt and 130pt Mag-Lock card cases. Features: Acid-free / No PVC. Fits our 100pt & 130pt Mag-Lock card cases. Ultra-clear polypropylene. Built-in tray for neat sleeve storage. MintFit® is a sub-series of Palms Off Gaming's Collector's Series range of products, which are designed to exceed the needs of the avid Australian collecting community.
Our extra thick PSA & CGC MintFit Sleeves are optimally sized for your PSA graded cards, any like-sized slab will also fit (see slab dimensions below). Each pack contains 50pc 100 micron thick polypropylene sleeves. Archival-safe PVC-free and acid-free premium material. Also featuring a V Shaped resealable lip - your PSA cards are going to be well protected. Features: V-Shaped resealable lip 100 micron PVC and acid-free material Great clarity premium material Archival safe Designed for typical 35pt PSA slab Please note due to increased sleeve thickness there is a very slighy clarity sacrifice on these sleeves comparitively with their 50 micron counterparts. Sleeve dimensions 86mm x 138mm Typical slab dimensions for reference: 80mm x 135mm x 6mm (W x L x H)
Our PSA & CGC MintFit Sleeves are optimally sized for your PSA graded cards, any like-sized slab will also fit (see slab dimensions below). Each pack contains 100pc 50 micron thick polypropylene sleeves. Archival-safe PVC-free and acid-free high-clarity premium material. Also featuring a V Shaped resealable lip - your PSA cards are going to be well protected. Features: V-Shaped resealable lip 50 micron PVC and acid-free material High clarity premium material Archival safe Designed for typical 35pt PSA slab Sleeve dimensions 86mm x 138mm Typical slab dimensions for reference: 80mm x 135mm x 6mm (W x L x H)
Made for our 35pt top loaders to completely protect cards from any potential contaminants and dust. Perfect to additionally combine with our Top Loader Zip Binders! Features: Acid-free / No PVC. Fits standard-sized 35pt top loaders. Ultra-clear polypropylene. Built-in tray for neat sleeve storage. MintFit® is a sub-series of Palms Off Gaming's Collector's Series range of products, which are designed to exceed the needs of the avid Australian collecting community.
This Top Loader Binder has been publicly since we all have been collecting. We have tested and re-moulded the pages numerous times to get everything perfect, from the fit, to ease of use. We are proud to introduce you to our Top Loader Zip Binder. These 216 capacity binders are designed to fit standard size 35pt thick top loaders. Great to protect TCG cards and sets such as Pokemon, Magic: The Gathering, Digimon, One-Piece, Dragon Ball, and more. Perfect to combine with our Soft Sleeves, 35pt Top Loaders and our 35pt Top Loader oversleeves! Features: Classic Collector's Series textured PU leather finish 216 top loader capacity (suitable for 35pt Top Loaders) Durable steel zip, with O-ring to allow for labelling Soft, double-sided pages Side-loading CLEAR pockets. Polyester felt inside cover Premium microfiber binder cover bag with drawstrings This clear itteration is primarily geared toward less heavy use-cases, such as personal collection admiration. If you intend to use this Top Loader Binder for heavy use cases, like regular trade days, we suggest our Matte version, for a scratch resistant finish and higher durability page design.
